Storage of biomass is associated with problems like heat development, biomasslosses, and reduction of the fuel quality. Certain processes such as biological- andchemical degradation are responsible for these storage problems. This master?sthesis was carried out at Vattenfall Research and Development AB and is alignedtowards quantifying the biomass losses from short-term storage (1-2 months) ofbark and recovered wood. The biomass was stored in outdoor piles during differentseasons, campaign 1 (summer) and campaign 2 (autumn).

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

In the last decade, member states of the European Union have adopted a range of measures to decrease the dependency on fossil fuels. This has led to an increased use of biomass in heat and power production. In some countries, the lack of forest resource has led to large scale power producers importing their biomass needs. Due to high energy content and homogeneity, wood pellets have become an internationally traded commodity used for large scale power production. The Baltic States have emerged as one of the largest wood pellet exporting regions in Europe.

The need of raw material does of course fluctuate but the long term view is an increasing demand due to the growing consumption of sawn timber products, pulp, paper and lately also biomass. This has led to a keener competition for wood. At the same time there is an ongoing structural change of a significant part in the Swedish wood supply market, the private forest owners. In 1992, 22 % of Sweden´s 335 000 private forest owner lived apart from their forest. In 2007 this figure had risen to 36 %.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

This final thesis is initiated by the wood fuel department at the Swedish forest company Sveaskog as part of a project which also involves two other final thesises. The overall goal of the project is to investigate Sveaskog´s possibilities to produce and sell different wood fuel assortments in Västerbotten and the southern parts of Norrland. The aim of this thesis is to investigate how much wood fuel Sveaskog can produce in the area during the next five years and what that would cost. Furthermore the thesis will investigate the total possible supply of wood fuel from all other possible producers in the area. Treated assortments are forest residues from final fellings, whole trees from direct wood fuel thinnings, non industrial wood and industrial by-products from sawmills. The main effort to investigate Sveaskog´s production possibilities has been made to calculate the possible annual amount of forest residues and fuel from wood fuel thinnings that can be produced.

An increasing demand for wood products in China has resulted in large areas invested in fast-growing tree plantations of eucalyptus. Eucalyptus plantations are often associated with an intensive management including fertilization. By understanding the effects of fertilization and where in the ecosystem nutrients are accumulated a more sustainable forest management could be achieved. In this study, a nutrient budget including all biomass and soil components was created for Eucalyptus urophylla. The examined nutrients were nitrogen, phosphorus and potassium.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting biofuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional biofuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.